Seat Cover Installation Instructions.

Step 1: Pull the hood of the seat cover over the top of the seat. (There may be a velcro opening to putyour headrest through).
Step 2: Smooth the seat cover to fit the backrest by pressing the cover between the seat and the backrest as shown.
Step 3: Pull the center straps between the seat and backrest and then carefully reach underneath and attach the hooks to the bottom of the seat. Some seat covers may have a quick release clip rather than hooks.
Step 4: Pull up the seat cover and the skirting up over the front of the seat it should fit snuggly all around. Creases may be smoother out to the sides and between the seat and backrest with your hands. Excess creases should be pressed into the space between the seat cushion and backrest.
Step 5: To prevent covering the side seat controls tuck the side skirting material behind the cosmetic plastic plate on the outside of the seat. This will secure the skirting material and to prevent it from shifting and give you a snug fit.
Step 6: Attach the hook straps or quick release clips on the underside of the seat as shown.
Step 7: Carefully cut notches in the velcro strip where the headrest is to accomodate the headrest posts. Seal velcro so no opening is visible.